The NEW "ULTRA SOURCE" retains all the advantages of the original Sloan E-Beam source, large hearth capacity, high deposition rates, long filament life, and industrial reliability, but has been re-engineered. There is no need to disconnect water fittings when disassembling the source for routine maintenance. All wear surfaces are now stainless steel instead of copper. Water leaks caused from removing the hearth have been eliminated.
Already have an original Sloan Multi-Pocket E-Beam Source?
The ULTRA SOURCE shares many of the same components as the original Sloan source - expendables, magnets, anodes, beam formers, filament blocks and many other parts are all compatible.
FEATURES
Large Pocket -- Up to 40cc
Interchangeable Crucibles
270 Bent Beam Design for Longer Filament Life
High Operating Efficiency
XY Sweep Capability
SPECIFICATIONS
Output Power
- Maximum Power
12 kW
- Emission Voltage
10 kV
- Emission Current
Up to 1.2 Amps
Efficiency
In excess of 99% of Beam Power into Hearth
Beam Characteristics
Type
270º Beam
Spot Size
0.375" x 0.375"
Sweep
Longitudinal / Lateral with Sweep Controller
Required Power
- Source
410 kV, 01.2 A
Filament
08 VAC, 40 A
Cooling Water
1.7 gpm, 45 psi Minimum
Required Operating Pressure
Below 2 x 10-4
Maximum Bake-Out Temperature
250 C
Hearth Characteristics
Material
OFHC Copper
Dimensions*
Truncated 30 Cone: 2.0" x 1.50" x 0.92"
(Top x Bottom x Depth)
Capacity
7cc to 40cc
Liner
As Required
Overall Dimensions
5.4" x 4.5" x 5.9" (HxWxL)
(137 mm X 114 mm X 149 mm)
The NEW "ULTRA SOURCE" retains all the advantages of the original Sloan E-Beam source, large hearth capacity, high deposition rates, long filament life, and industrial reliability, but has been re-engineered. There is no need to disconnect water fittings when disassembling the source for routine maintenance. All wear surfaces are now stainless steel instead of copper. Water leaks caused from removing the hearth have been eliminated.
Our Components
