[ Equipment Manufacturer Support ]
Vacuum Equipment Manufacturers
YTI Services & Supports
Find service, repair, refurbishment, parts, field support, modernization, and replacement options for vacuum coating, cryogenic, pumping, deposition, electronics, and measurement equipment from leading current and legacy manufacturers.
Independent Multi-Brand Support
Support built around the equipment you already own
Production facilities and laboratories often operate equipment from several manufacturers—and many systems combine original components, later upgrades, custom controls, replacement pumps, and legacy hardware in one working package. YTI evaluates the equipment as a complete vacuum and process system instead of limiting the diagnosis to a single nameplate.
Use this hub to find the manufacturer connected to your vacuum coating system, diffusion pump, cryochiller, cryopump, controller, electron-beam source, feedthrough, power supply, profilometer, leak detector, or supporting component. Each manufacturer page will connect the equipment to the appropriate YTI service, parts, engineering, rental, and replacement resources.
Browse by Equipment Type
Start with the equipment in your facility
Select a category to filter the manufacturer directory below.
Vacuum Coating Systems
Complete chambers, coaters, pumping packages, controls, sources, utilities, and process hardware.
View system manufacturers ↓Diffusion Pumps
High-vacuum pumps, heaters, jet assemblies, seals, fluid, cooling, and backing-system support.
View pump manufacturers ↓Cryochillers & Cryopumps
Cryogenic refrigeration, cold heads, compressors, lines, controls, pumps, and refrigerant support.
View cryogenic manufacturers ↓Controllers & Instrumentation
Deposition controllers, gauges, vacuum measurement, sensors, rate control, and instrumentation.
View control manufacturers ↓Electron-Beam Sources
E-beam guns, source assemblies, sweep systems, magnets, high-voltage components, and controls.
View source manufacturers ↓Feedthroughs & Fittings
Electrical and mechanical feedthroughs, magnets, vacuum fittings, flanges, and custom hardware.
View hardware manufacturers ↓Power & Valve Controls
Electron-beam power supplies, valve controllers, boards, displays, wiring, and replacement controls.
View electronics manufacturers ↓Profilometers & Leak Detectors
Surface measurement, stylus profilometry, helium leak detection, electronics, service, and calibration.
View measurement manufacturers ↓Manufacturer Directory
Find your equipment manufacturer
Search by company name or filter the directory by equipment category.
VPT
Support for VPT vacuum coating systems, chambers, pumps, deposition hardware, controls, field troubleshooting, refurbishment, and modernization.
View VPT support →Leybold
Service and refurbishment support for Leybold coating systems, diffusion pumps, vacuum components, connected pumps, controls, and legacy equipment.
View Leybold support →Temescal
Multi-system support for Temescal coaters, deposition controls, electron-beam sources, sweep equipment, magnets, feedthroughs, and related electronics.
View Temescal support →Veeco / Dektak
Support for Veeco vacuum coating equipment and Dektak stylus profilometers, including troubleshooting, repair, calibration, parts, sales, and rentals.
View Veeco / Dektak support →Denton Vacuum
Field service, troubleshooting, chamber work, pumping support, control upgrades, refurbishment, and repurposing for Denton Vacuum systems.
View Denton Vacuum support →CHA
Support for CHA vacuum coating systems, deposition controllers, electronics, power equipment, chamber components, field diagnostics, and modernization.
View CHA support →Kurt J. Lesker
Independent troubleshooting, repair, refurbishment, chamber modifications, component support, and system-level service for Kurt J. Lesker equipment.
View KJL support →Varian / Agilent
Service and refurbishment support for Varian and Agilent diffusion pumps, helium leak detectors, vacuum equipment, heaters, parts, and legacy models.
View Varian / Agilent support →CVC
Diffusion pump cleaning, inspection, refurbishment, heater support, seals, fluid, leak testing, and connected pumping-system service for CVC equipment.
View CVC support →Balzers
Support for Balzers diffusion pumps, deposition controls, vacuum instrumentation, electronics, replacement parts, and legacy vacuum equipment.
View Balzers support →Polycold
Cryochiller repair, full refurbishment, refrigerant recharge, leak correction, compressor and controls support, rentals, fleet planning, and replacement equipment.
View Polycold support →Edwards
Independent support for Edwards cryogenic and vacuum equipment, including cryopump repair, cold-head service, compressor evaluation, refurbishment, and system diagnostics.
View Edwards support →Brooks
Cryogenic equipment troubleshooting, cryopump and cold-head support, compressor evaluation, repair, refurbishment, and connected vacuum-system service.
View Brooks support →Telemark
Support for Telemark cryogenic equipment, electron-beam guns and sources, sweep systems, magnets, feedthroughs, controls, and connected coating equipment.
View Telemark support →MaxCool
Cryochiller troubleshooting, refrigeration support, repair, refurbishment, leak correction, controls evaluation, refrigerant service, and replacement planning.
View MaxCool support →Sloan
Support for Sloan deposition controllers, electron-beam equipment, feedthroughs, profilometers, electronics, replacement components, and legacy equipment.
View Sloan support →Granville-Phillips
Vacuum gauge, controller, sensor, display, power, wiring, calibration, electronics, and system-integration support for Granville-Phillips instrumentation.
View Granville-Phillips support →MKS
Independent service support for MKS vacuum instrumentation, gauges, controllers, sensors, electronics, process integration, and legacy equipment.
View MKS support →Inficon
Support for Inficon deposition and vacuum instrumentation, controllers, sensors, electronics, troubleshooting, calibration, and system integration.
View Inficon support →Parker
Vacuum fitting, component, connection, sealing, adaptation, leak correction, replacement hardware, and custom-fabrication support involving Parker equipment.
View Parker support →Niles
Component-level repair, refurbishment, high-voltage evaluation, load testing, board repair, controls support, and replacement planning for Niles power supplies.
View Niles support →Key-High
Valve-control troubleshooting, component repair, electronics refurbishment, wiring and output evaluation, calibration, and replacement-control support.
View Key-High support →YTI Products
YTI-built and custom replacement products for vacuum coating systems, electron-beam sources, feedthroughs, magnets, fittings, power supplies, controls, chambers, and obsolete equipment.
View YTI products →Current, Legacy & Discontinued Equipment
Factory support may end before the equipment does
Aging vacuum equipment can remain valuable when the chamber, process geometry, infrastructure, or production qualification would be costly to replace. YTI evaluates whether a system or component can be repaired, rebuilt, reproduced, modernized, repurposed, or supported with a custom replacement.
Recover a defined failure
Diagnose and correct a specific mechanical, vacuum, cryogenic, electrical, control, cooling, leak, or process-related fault.
Rebuild aging equipment
Perform a deeper teardown, cleaning, inspection, wear-part replacement, resealing, repair, reassembly, and functional test.
Replace obsolete technology
Upgrade controls, sensors, electronics, power equipment, pumps, refrigeration, safety functions, and interfaces while retaining useful assets.
Manufacturer Support Paths
More than a list of equipment names
Every manufacturer page will connect the equipment to the YTI capability that can move the issue forward.
Field Service
Nationwide on-site troubleshooting for downtime, pressure, leaks, cooling, controls, coating performance, and system integration.
View field service →Repair & Refurbishment
Focused repair and complete rebuild options for pumps, cryogenic equipment, electronics, sources, controls, and components.
Browse service options →Parts & Fabrication
Stocked components, custom machining, welding, brazing, feedthroughs, flanges, heaters, vacuum hardware, and replacement parts.
View components →Systems, Rentals & Replacements
New, refurbished, used, rental, repurposed, and YTI-built equipment options for production continuity and long-term planning.
View sales and rental →From Nameplate to Service Plan
How YTI reviews manufacturer equipment
Identify
Share the manufacturer, equipment type, model, serial number, nameplate, photos, application, symptoms, and production urgency.
Evaluate
YTI reviews the equipment, connected system, available technical information, likely failure areas, service access, parts, and support options.
Recommend
The next step may be remote review, on-site service, depot repair, refurbishment, calibration, fabrication, rental, or replacement.
Support
YTI completes and documents the work, verifies practical operation, and recommends maintenance, spares, upgrades, or fleet planning.
Related YTI Resources
Continue by equipment type or service need
Vacuum Pumps
Diffusion pumps, cryopumps, mechanical pumps, connected equipment, parts, rentals, repair, and refurbishment.
View the Pumps hub →YTI Services
Field service, repair, refurbishment, engineering, fabrication, components, refrigerant, and rentals.
View the Service hub →Vacuum Systems
Vacuum coating systems, custom builds, refurbished equipment, repurposing, integration, sales, and rentals.
View vacuum systems →Components & Parts
Vacuum, cryogenic, electronics, source, feedthrough, fitting, heater, control, and replacement-component support.
View components →Who We Support
Equipment support for production, research, and critical processes
Why Choose YTI
Multi-brand capability connected under one roof
System-Level Diagnosis
YTI reviews how the manufacturer equipment interacts with the chamber, pumps, cryogenics, controls, utilities, hardware, and process.
One Technical Resource
Field service, repair, refurbishment, machining, fabrication, parts, electronics, rentals, and engineering can be coordinated together.
Legacy Equipment Support
YTI evaluates equipment that may have limited factory support, obsolete controls, unavailable parts, or undocumented modifications.
Production Uptime
Emergency response, preventive maintenance, critical spares, rentals, fleet planning, and staged refurbishment help reduce downtime risk.
Need help with a specific manufacturer or model?
Send the equipment nameplate, manufacturer, model, application, symptoms, photos, and production urgency. YTI will help identify the correct service path.
Answers
