[ Independent Equipment Support · Current, Legacy & Mixed-Brand Systems ]
Additional Vacuum Equipment Manufacturers
Specialist Brand Support in One Complete Hub
YTI supports vacuum coating, cryogenic, pumping, instrumentation, power, valve and component equipment from additional current and legacy manufacturers. Use this page to identify the brand and equipment category, then continue to the correct YTI system, repair, refurbishment, fabrication or field-service page.
Useful manufacturer coverage · without low-value duplicate pages
A practical route for specialist, legacy and lower-volume equipment brands
Not every manufacturer requires a separate long-form page. Some brands represent a narrow equipment category, a legacy nameplate, a product family rather than an independent manufacturer, or equipment that YTI encounters primarily as one part of a larger mixed-brand vacuum system.
This consolidated page gives each remaining manufacturer a searchable, linkable destination while keeping detailed service information on the pages where it belongs. Customers can identify their equipment here, then continue to the relevant system hub or focused YTI service page.
Manufacturer directory
Browse the remaining manufacturers by equipment type
/brands/additional-vacuum-equipment-manufacturers/#edwards.Cryogenic equipment manufacturers and product families
Cryopumps, compressors, cold heads and water-vapor cryochillers
Use these pathways for cryogenic equipment integrated into vacuum coating, semiconductor, research and production systems. Detailed repair and refurbishment work remains on YTI’s cryogenic service pages.
Edwards
Cryopumps · Cryogenic SystemsYTI can evaluate Edwards cryogenic vacuum equipment and connected system hardware where the issue involves cryopumps, cold heads, compressors, controls, lines, vacuum integration or production performance.
- Cryopumps and cold-head assemblies
- Compressors, lines and controller interfaces
- System troubleshooting and preventive maintenance
- Current and legacy installed configurations
Brooks / CTI
Legacy CTI-Cryogenics EquipmentYTI can review Brooks- and CTI-labeled cryopumps, compressors, cold heads, controllers and connected vacuum hardware. Exact serviceability depends on the model, generation and installed configuration.
- CTI and Brooks cryopump platforms
- Cold heads, compressors and control cables
- On-board and external control configurations
- Mixed-generation cryogenic installations
MaxCool
Polycold Cryochiller Product FamilyMaxCool is a Polycold cryochiller family rather than a separate independent manufacturer. YTI routes MaxCool equipment through its Polycold and cryochiller support pathways.
- Water-vapor cryochillers and cryocoils
- Refrigerant circuits and compressor systems
- Recharge, leak repair and refurbishment
- Controls, safeties and chamber integration
Vacuum measurement, gauges and process instrumentation
Controllers, transducers, leak-detection and pressure-measurement equipment
Instrumentation faults often involve the gauge head, controller, cable, power section, setpoint, relay, process wiring or vacuum system—not just the front-panel instrument.
MKS
Vacuum Measurement · Controls · Process HardwareYTI can evaluate MKS vacuum instrumentation and connected control hardware used for pressure measurement, process feedback, valve control, interlocks and coating-system integration.
- Vacuum gauges, transducers and controllers
- Pressure feedback and setpoint interfaces
- Control electronics and system wiring
- Mixed-brand process-instrumentation systems
INFICON
Vacuum Gauges · Leak Detection · Deposition InstrumentsYTI can review INFICON instruments and connected vacuum-system interfaces where faults involve gauges, deposition measurement, controller electronics, cabling, process feedback or leak-detection workflows.
- Vacuum measurement and controller equipment
- Deposition-monitoring instruments and interfaces
- Helium leak-detection system integration
- Legacy and mixed-generation installations
Granville-Phillips
Legacy & Current Vacuum GaugingYTI can evaluate Granville-Phillips pressure gauges, controllers, display units, setpoints, relay outputs, sensor cabling and related chamber or pump-control interfaces.
- Rough-, medium- and high-vacuum measurement
- Gauge controllers, displays and sensor heads
- Relay outputs, setpoints and process permissives
- Replacement and modernization planning
Complete vacuum coating equipment
Research, optical, production and custom thin-film systems
Complete-system support begins with the chamber, pumping stack, deposition sources, controls, utilities, fixtures and process—not with an isolated component assumption.
Denton Vacuum
Coating & Deposition SystemsYTI can evaluate Denton Vacuum systems used for sputtering, evaporation and related thin-film processes, including legacy controls, pumping equipment, sources, fixturing and modified chambers.
- Research and production coating platforms
- Sputtering and evaporation configurations
- Vacuum, source, control and utility integration
- Legacy modernization and chamber repurposing
VPT
Vacuum Process Technology SystemsYTI can review VPT thin-film coating systems, including batch, inline and specialized research or production configurations with evaporation, sputtering, ion-beam and mixed deposition hardware.
- Batch and inline coating platforms
- Evaporation, sputtering and ion-beam equipment
- Controls, fixtures, sources and pumping systems
- System modifications and integration support
Kurt J. Lesker
Vacuum Systems · Chambers · ComponentsYTI can evaluate installed Kurt J. Lesker coating systems and mixed-brand assemblies where service involves chamber hardware, pumps, sources, controls, feedthroughs, valves, instrumentation or process integration.
- Research and thin-film deposition systems
- Chambers, sources, fixtures and vacuum hardware
- Gauges, valves, pumps and control integration
- Modifications, repairs and continuity planning
Legacy high-vacuum pumping equipment
CVC diffusion pumps and connected pumping stacks
CVC equipment should be evaluated as part of the complete high-vacuum stack: pump body, jet assembly, heater, cooling, fluid, baffle, valves, foreline and backing pump.
CVC / Consolidated Vacuum Corporation
Legacy Oil Diffusion PumpsYTI can evaluate many legacy CVC oil diffusion pumps and connected high-vacuum hardware for refurbishment, heater and cooling review, pump-fluid planning, leak testing, backing-system troubleshooting and replacement-component options.
- PMC, PMCS, MCF and other legacy pump families
- Jet assemblies, heaters, boiler areas and seals
- Baffles, cold caps, valves and cooling circuits
- Backing pumps, foreline pressure and chamber integration
Vacuum interfaces, e-beam power and valve hardware
Components and controls integrated throughout the vacuum system
These brands are commonly encountered as part of a larger system. YTI reviews compatibility, wiring, interfaces, utilities and process requirements before confirming repair or replacement options.
Parker
Fittings · Valves · Tubing · Fluid ControlYTI can review Parker fittings, valves, tubing, seals and fluid-control hardware used around vacuum chambers, cooling circuits, gas delivery, cryogenic equipment and custom process assemblies.
- Tube fittings, valves and connection hardware
- Cooling-water and process-gas interfaces
- Seals, adapters and custom transition assemblies
- Replacement selection and fabricated integration
Niles Electronics
E-Beam Power Supplies · Sweep ControlsYTI can evaluate Niles electron-beam switching power supplies, programmable sweep equipment, source-control interfaces and connected high-voltage, emission and interlock hardware.
- Electron-beam gun switching power supplies
- Programmable magnetic sweep controls
- High-voltage, emission and source interfaces
- Repair, refurbishment and replacement planning
Key-High Vacuum
Vacuum Valves · Actuation · Legacy ControllersYTI can review Key-High vacuum valves, actuators, gas-flow hardware and legacy diffusion-pump or cryopump control equipment integrated into chamber pumping and process systems.
- Angle, inline and specialty vacuum valves
- Pneumatic, electric and piezoelectric actuation
- Legacy pump and valve control interfaces
- Repair, replacement and controls-integration planning
Continue to the focused YTI page
Choose the service path that matches the equipment need
Field Troubleshooting
For production systems with vacuum, source, pump, control, utility or process problems that cannot be isolated to one component.
View field service → ElectronicsElectronics & Power-Supply Repair
For controller, display, board, power, high-voltage, sweep, emission, instrumentation and interface faults.
View electronics repair → High Vacuum PumpsDiffusion-Pump Refurbishment
For teardown, cleaning, internal inspection, heater and seal review, reassembly, testing and documentation.
View pump refurbishment → CryogenicCryochiller & Cryopump Repair
For cryogenic vacuum equipment, cold heads, compressors, controls, lines and connected system faults.
View cryogenic repair → ModernizationControls & Sensor Upgrades
For obsolete gauges, valve logic, pump sequencing, PLC/HMI interfaces, safety circuits and process feedback.
View controls upgrades → Custom HardwareMachining & Vacuum Fabrication
For adapters, flanges, manifolds, feedthrough interfaces, chamber modifications and obsolete-component replacements.
View fabrication → ContinuityComponents & Critical Spares
For stocked replacement hardware, refurbished components, common failure items and planned spare inventories.
View component stocking → ReliabilityPreventive Maintenance
For inspections, testing, cleaning, performance baselines and planned service before a production failure occurs.
View preventive maintenance → EquipmentUsed & Refurbished Equipment
For temporary replacements, refurbished equipment, production-continuity options and equipment availability.
View available equipment →From a nameplate to the correct solution
How YTI evaluates an additional manufacturer support request
Identify
Collect the exact manufacturer, model, serial number, nameplate, complete equipment photos, rear connections, connected devices, utilities, controls, manuals, modifications and service history.
Map the System
Determine how the equipment connects to the chamber, pump, cryogenic stage, sources, gauges, controls, valves, power, cooling, gas, automation and process.
Select the Path
Choose field troubleshooting, depot repair, complete refurbishment, controls modernization, custom fabrication, component replacement, rental or staged continuity planning.
Verify
Test the repaired or upgraded equipment in the appropriate electrical, mechanical, vacuum, cryogenic or process context and document completed work and next priorities.
Browse by equipment instead
Related YTI equipment-system hubs
Do you have equipment from one of these manufacturers?
Send the manufacturer, exact model and serial number, clear nameplate and complete-equipment photos, connected hardware, displayed faults, process symptoms, maintenance history, modifications and production urgency. YTI will identify the most appropriate system and service pathway.
Answers
