Glow Discharge Power Supply
YTI manufactures the GDS100 & GDS101 Glow Discharge Power Supply. These 2 kW supplies will drive the standard aluminum glow rod for ionization bombardment of substrates prior to the coating process. Other applications of this power supply include DC bias to substrates in sputter systems and uses requiring saturable reactor current sources for low impedance loads.
The GDS100 output is variac controlled with remote On/Off capability. There are two (2) safety interlocks available (door and vacuum) to protect both the operators and the hardware.
SPECIFICATIONS
| Input | 220 V/60 Hz, Single Phase, 10 A Remote On/Off Capability |
| Output | Positive or Negative 07000 V 0700 mA |
| Interlocks | Two (2) Available |
| Control | Variac |
| Weight | 85 lbs. |
| Mounting | Standard 19″ Rack 10.5″ High |
The GDS101 output is manually controlled via the front panel or via a 0-10V signal from a PLC or deposition controller. This model also has remote On/Off capability. There are two (2) safety interlocks available (door and vacuum) to protect both the operators and the hardware.
SPECIFICATIONS
| Input | 220 V/60 Hz, Single Phase, 10 A Remote On/Off Capability |
| Output | Positive or Negative 07000 V 0700 mA |
| Interlocks | Two (2) Available |
| Control | Rotary Manual / 0-10V External Signal |
| Weight | 85 lbs. |
| Mounting | Standard 19″ Rack 10.5″ High |
