YTI Offers All-in-one Touchscreen Valve Controller/Vacuum Gauge Controller

A complete vacuum deposition valve controller package with gauge readouts and modern connectivity.

YTI Introduces a new level of valve controllers. A self contained unit offering automated valve control, gauge readouts and set-points. Providing user selectable 24vdc or 110VAC control voltage for valve actuation and ON/OFF control of system pumping. YTI’s new touchscreen controller offers automatic, manual and service modes, with corresponding levels of protection for safe and easy valve operation. The controller can be specifically setup by the factory for any system, including diffusion, cryogenic and turbo pump models. All on a bright, colorful and easy to read screen!

User friendly features

YTI’s new touchscreen valve controller was designed for ease of operation. Easy to read vacuum level readouts that change color when user set set-points are reached. A main control screen that displays gauge readouts and valve status for all-in-one screen operation. Separate valve control, gauge readout and diagnostic screens included as well. Automated mode offers hands free operation from atmosphere to deposition pressure. Manual mode provides complete manual control over valve operation, but with a level of protection against errors. The unit also incorporates a built in emergency stop button to safely and quickly return all valves to stand-by status. Installation is a snap, with screw type wiring inputs and outputs, no need for special expensive connectors.

Multi-port connectivity

Ethernet port, Micro-SD and USB connectivity. Rear mounted Ethernet port provides connection to any network for DATA logging, and remote access by authorized off-site users.  The remote access can be used to check machine status and remote troubleshooting, allowing quick and easy diagnostics of issues, resulting in much less downtime. Remote access can be performed from any web browser or via a low cost Android and IOS application from your smart phone. Administrators can select password protected levels of control for each remote user, from just viewing screens to full control. The unit incorporates a Micro-SD card port for direct data logging. Front mounted USB port for easy download of firmware updates. Just load the new firmware on a USB stick and follow on screen prompts.

YTI Adds Human Touch and Elevates Technology

FOR IMMEDIATE RELEASE

YTI Adds Human Touch and Elevates Technology

Operator interface touch panels added to new and refurbished vacuum systems

June 2014; Ashford, CT—YTI, Inc. installs human machine interface (HMI) panels to its new and refurbished vacuum coating systems. The touch panels are custom programmed for each application, providing efficient operation and remote troubleshooting functions that save significant time and money. All upgraded vacuum systems remain outfitted with manual operability for back-up and testing functions.

YTI’s HMI panels provide operators with user-friendly control and monitoring of all system parameters. The HMI panels expand the range of system operations, provide data collection and analysis, and display full system operating functions and diagnostics that are essential during servicing, troubleshooting, and testing. New functions, and even complete system reconfiguration may be easily and swiftly integrated.

About YTI

With its fleet of fully equipped service vehicles, 10,000 sq. ft. manufacturing and service facility, and staff of highly qualified, experienced professionals, YTI remains a respected leader in custom vacuum systems, engineering, components, and round-the-clock service. The company services brands such as Polycold, Telemark, Leybold, MDC, Dektak and Stokes and provides installation, preventive maintenance and customized service contracts to meet the vacuum coating industry’s range of equipment, facility, or application requirements. This year marks the company’s thirty-year anniversary.

For more information about YTI, please visit www.https://http://ytionline.com.

YTI President Savulis Recognized for Leadership

FOR IMMEDIATE RELEASE

YTI President Savulis Recognized for Leadership

Local business owner receives 2014 Ashford Business of the Year Award

June 2014; Ashford, CT—Brian Savulis, owner and president of Yeagle Technology, Inc. (YTI), was presented with the Ashford Business of the Year Award at the Windham Chamber of Commerce 2014 Awards ceremony held May 29. The award is presented annually to that Ashford business which has significantly contributed to its community. Mr. Savulis purchased YTI, an Ashford-based vacuum systems company, in 2005 and has overseen its expansion beyond field service to include customization of existing vacuum equipment and building of new systems. In that time the company has also seen significant growth in sales, employees, and national clients.

In addition to his professional duties at YTI, Mr. Savulis has served as president of the Ashford Business Association, an arm of the Ashford Economic Development Commission. Under his leadership the Association grew considerably in attracting new membership and participation from surrounding towns. He directed numerous fundraising events that benefited local charities and organizations, and he established a successful Business Expo for the Ashford community.      

The award was presented by Richard Williams, chairman of the Ashford Economic Development Commission, who thanked Mr. Savulis for his years of service to the community and to local businesses.

Mr. Savulis is a resident of Putnam.

For more information about YTI, please visit www.https://http://ytionline.com. For more information about Ashford Business Association, please visit www.ashfordbusiness.org.

Speed and Expertise Set Apart YTI’s Diffusion Pump Service

Ashford, CT

Vacuum pump rebuilds result in improved performance and profitability

YTI, a fully equipped service, remanufacturing and repair center for nearly all types of vacuum pumps, has gained market leadership with its fast, affordable diffusion pump rebuilds. Improved pump efficiency and fast service turnaround ensure that vacuum system users operate competitively and cost-effectively. YTI specializes in fast, expert repair of diffusion pumps, which tolerate extreme operating conditions that other pumps cannot. Diffusion pumping remains a highly economical means of creating high vacuum environments.

Distinctive service and quality parts
The company’s success is attributed to its ability to customize new and used vacuum coating equipment to perform new technology processes and to meet operators’ exact requirements expeditiously. Its trademark quality and speed of service are the result of YTI’s staff of fully trained service engineers and complete in-house electronics laboratory.

As a fully equipped service and repair center for virtually every type of vacuum instrument, YTI trains and maintains a staff of vacuum coating equipment and service experts who ensure superior quality repairs and service in notably short turnaround times for new installations, preventive maintenance, and emergency service. The company provides new, re-engineered, and pre-owned vacuum systems, vacuum consulting, custom fabrication, in-house equipment repairs, and field service.

In addition to a full line of spare parts for most vacuum pumps and a variety of rebuilt pumps available at very competitive prices, YTI provides Diff-Therm® platen heaters, high quality tubular heating elements which set the standard for long life, evenly distributed process heating, and efficient power generation.

YTI’s Glow Discharge Power Supply Available in Two Control Styles

Ashford, CT

Door and vacuum safety interlocks built in

YTI’s Glow Discharge Power Supply, available in variac and manual control models, contains 2 kW power for effective, efficient output. These reliable units drive standard aluminum glow rods for ionization bombardment of substrates prior to a range of vacuum coating processes. Other applications include DC bias to substrates in sputter systems and those requiring saturable reactor current sources for low impedance loads.

YTI’s Glow Discharge Power Supply model GDS100 features a variac control with remote on/off capability. Door and vacuum safety interlocks are available to protect both the operators and the hardware. Also featuring remote on/off capability and available with two safety interlocks, the GDS101 model offers a manually controlled output via the front panel or via a 0-10V signal from a programmable logic controller (PLC) or deposition controller. Both discharge power supply models can be mounted on a standard 19″ rack.

YTI Now Offers Vacuum Leak Testing Services

Ashford, CT

Specialized leak detection methods help prevent costly downtime

YTI is pleased to announce the expansion of its Vacuum leak testing services to include leak detection for all vacuum components. Testing with helium can be performed by sniff, accumulation, inside-out or outside-in test methods. All these testing services are available at YTI’s fully equipped laboratories or at clients’ sites and are conducted by the company’s knowledgeable technicians.

Leaks left undetected in vacuum coating equipment can be very costly and the root cause of poor coating quality and slow production. Periodic leak detection helps prevent unscheduled and time-consuming interruptions in production. YTI’s precision leak detection service spares customers from such costly unplanned downtime.

At YTI, helium is applied to find leaks too small for detection by other methods. The company’s highly experienced staff is an essential component in the process of vacuum leak detection. Their knowledge ensures that no areas are missed and known problem areas are double checked. YTI provides its vacuum coating clients with a wide range of systems, services, engineering and components.

YTI Now Stocking Polycold® Refrigerant

Ashford, CT

YTI now warehouses a complete inventory of replacement Polycold® refrigerants for all models from P-20 through PFC-1102. Access to the entire range of models advances YTI’s commitment to remain a consistent, reliable source for customers in need of Polycold refrigerant replacement and top-off charges.

YTI provides installation, preventive maintenance and customized service contracts to meet customers’ equipment, facility, and application requirements, servicing brands such as Polycold and Telemark. YTI’s continuing commitment to service includes around-the-clock availability, parts depot stocking for instant availability, and dispatching of parts and service personnel to any location within 36 hours.

YTI 24/7 Vacuum Technology Field Service and Support Expands Nationally

Ashford, CT

YTI has expanded the range of its 24/7 Emergency Service for vacuum equipment to include the continental United States. An exceptional staff and support organization of fully trained service engineers now provides comprehensive field service everywhere in the country. A complete array of test equipment in each service vehicle allows YTI to diagnose any vacuum system or electronics problem. YTI services brands such as PolycoldÆ, Telemark, Leybold, MDC, Dektak® and Stokes and provides installation, preventive maintenance and customized service contracts to meet customers’ equipment, facility, and application requirements.

YTI’s continuing commitment to service includes around-the-clock availability, parts depot stocking for instant availability, and dispatching of parts and service personnel to any location within 36 hours.